Xerox 8830 - Resetting Existing Accounts (continued); Resetting All Accounts (User and System); Deleting Specific User Accounts

REP 7.3 Roll Feed Pinch Rolls
Parts List on PL 7.5
WARNING
Switch off the Main Power Switch.
Disconnect the Power Cord.
NOTE: All three Roll Feed Pinch Roll
Assemblies are removed the same way.
Removal
1. Open the Media Supply Drawer and remove
the Media Roll.
2. (Figure 1): Remove the Roll Feed Pinch
Rolls.
Remove the springs (two
each Pinch Roll)
Remove the E-rings and
the shafts
Figure 1. Removing the Roll Feed Pinch Rolls
1/98
4-7
REP 7.3