SIGNALING SYSTEM
8-32
NG →
OK ↓
NG →
OK ↓
The tail/brake light fails to come on.
NG →
OK ↓
NG →
OK ↓
NG →
OK ↓
NG →
OK ↓
NG →
OK ↓
2. Check the horns.
Refer to “CHECKING THE
HORNS” on page 8-165.
Replace the horn(s).
3. Check the entire signaling system
wiring.
Refer to “CIRCUIT DIAGRAM (1/2)”
on page 8-27 and “CIRCUIT DIA-
GRAM (2/2)” on page 8-29.
Properly connect or repair the signaling
system wiring.
This circuit is OK.
1. Check the tail/brake light bulbs and
sockets.
Refer to “CHECKING THE BULBS
AND BULB SOCKETS” on page
8-152.
Replace the tail/brake light bulb, socket or
both.
2. Check the front brake light switch.
Refer to “CHECKING THE
SWITCHES” on page 8-149.
Replace the front brake light switch.
3. Check the rear brake light switch.
Refer to “CHECKING THE
SWITCHES” on page 8-149.
Replace the rear brake light switch.
4. Check the brake light relay.
Refer to “CHECKING THE RE-
LAYS” on page 8-157.
Replace the brake light relay.
5. Check the entire signaling system
wiring.
Refer to “CIRCUIT DIAGRAM (1/2)”
on page 8-27 and “CIRCUIT DIA-
GRAM (2/2)” on page 8-29.
Properly connect or repair the signaling
system wiring.
This circuit is OK.
To Next Page
Loading...
