YASKAWA Z1000 User Manual

Start-Up Programming & Operation
This chapter explains HOA keypad functions and gives instructions on programming the drive for
initial operation.
4.1 SECTION SAFETY...............................................................................................106
4.2 USING THE HOA KEYPAD.................................................................................107
4.3 THE DRIVE, PROGRAMMING, AND CLOCK ADJUSTMENT MODES.............112
4.4 START-UP FLOWCHARTS.................................................................................119
4.5 POWERING UP THE DRIVE................................................................................123
4.6 APPLICATION SELECTION................................................................................124
4.7 BASIC DRIVE SETUP ADJUSTMENTS..............................................................127
4.8 AUTO-TUNING.....................................................................................................143
4.9 NO-LOAD OPERATION TEST RUN....................................................................151
4.10 TEST RUN WITH LOAD CONNECTED...............................................................152
4.11 VERIFYING PARAMETER SETTINGS AND BACKING UP CHANGES............153
4.12 TEST RUN CHECKLIST.......................................................................................155
4.13 ADVANCED DRIVE SETUP ADJUSTMENTS.....................................................156
4
YASKAWA ELECTRIC TOEP C710616 45F YASKAWA AC Drive – Z1000 User Manual
105

YASKAWA Z1000 Specifications

General

Model	Z1000
Category	Controller
Humidity	95% RH or less (non-condensing)
Control Method	V/F Control
Frequency Range	400 Hz
Protection	Overcurrent, Overvoltage, Undervoltage, Overheat
Communication Options	Modbus
Operating Temperature	-10 to 50°C
Storage Temperature	-20 to 60°C
Altitude	Up to 1000 meters without derating
Cooling Method	Forced Air
Enclosure Rating	IP20
Voltage Class	200V, 400V