YASKAWA Z1000 - Protecting Main Circuit Terminals

u
Protecting Main Circuit Terminals
n
Insulation Caps or Sleeves
Use insulation caps or sleeves when wiring the drive with crimp terminals. Take particular care to ensure that the wiring does
not touch nearby terminals or the surrounding case.
n
Insulation Barrier
Insulation barriers are packaged with drive models 4A0361 through 4A0590 to provide added protection between terminals.
Yaskawa recommends using the provided insulation barriers to ensure proper wiring. Refer to Figure 3.29 for instructions on
placement of the insulation barriers.
Insulation Barrier
Figure 3.29 Installing Insulation Barriers
When wiring 4A0124, make sure the crimp terminals on the main circuit are connected so that they are facing in the correct
direction as shown in Figure 3.30.
A
A –Crimp terminals in correct position
Figure 3.30 Crimp Terminals
3.8 Main Circuit Wiring
82
YASKAWA ELECTRIC TOEP C710616 45F YASKAWA AC Drive – Z1000 User Manual