YASKAWA Z1000 User Manual

u
Removing/Reattaching the Front Cover
n
Removing the Front Cover
Drive Models 2A0011 to 2A0059, 4A0005 to 4A0040, and 4A0052ooB
1.
Remove the HOA keypad.
2.
Loosen the front cover screw using a #2 Phillips screwdriver. Screw sizes vary by drive model.
Figure 3.16 Remove the Front Cover (2A0011 to 2A0059, 4A0005 to 4A0040, and 4A0052ooB)
3.
Push in on the tab located on the bottom of the front cover and gently pull forward to remove the front cover.
Figure 3.17 Remove the Front Cover (2A0011 to 2A0059, 4A0005 to 4A0040, and 4A0052ooB)
3.6 HOA Keypad and Front Cover
YASKAWA ELECTRIC TOEP C710616 45F YASKAWA AC Drive – Z1000 User Manual
73
3
Electrical Installation

YASKAWA Z1000 Specifications

General

Model	Z1000
Category	Controller
Humidity	95% RH or less (non-condensing)
Control Method	V/F Control
Frequency Range	400 Hz
Protection	Overcurrent, Overvoltage, Undervoltage, Overheat
Communication Options	Modbus
Operating Temperature	-10 to 50°C
Storage Temperature	-20 to 60°C
Altitude	Up to 1000 meters without derating
Cooling Method	Forced Air
Enclosure Rating	IP20
Voltage Class	200V, 400V