YASKAWA Z1000 User Manual

• Motor overload status information
• Detailed information about the present Run command and frequency reference source selection
Refer to U4: Maintenance Monitors on page 336 for a complete list of U4-oo monitors and descriptions.
u
U5: PI Monitors
These monitors display various aspects of PI control. Refer to U5: PI Monitors on page 337 for a complete list of U5-oo
monitors and descriptions.
u
U6: Operation Status Monitors
These monitors display reference data for the output voltage and vector control and the offset value added to the frequency
reference by the frequency offset function.
Refer to U6: Operation Status Monitors on page 338 for a complete list of U6-oo monitors and descriptions.
4.13 Advanced Drive Setup Adjustments
YASKAWA ELECTRIC TOEP C710616 45F YASKAWA AC Drive – Z1000 User Manual
195
4
Start-Up Programming & Operation

YASKAWA Z1000 Specifications

General

Model	Z1000
Category	Controller
Humidity	95% RH or less (non-condensing)
Control Method	V/F Control
Frequency Range	400 Hz
Protection	Overcurrent, Overvoltage, Undervoltage, Overheat
Communication Options	Modbus
Operating Temperature	-10 to 50°C
Storage Temperature	-20 to 60°C
Altitude	Up to 1000 meters without derating
Cooling Method	Forced Air
Enclosure Rating	IP20
Voltage Class	200V, 400V