YASKAWA Z1000 User Manual

u
A2: User Parameters
No.
(Addr.
Hex)
Name LCD Display Description Values Page
A2-01 to
A2-32
(106 to
125)
User Parameters 1 to
32
User Param 1 - 32
Recently edited parameters are listed here. The user can also
select parameters to appear here for quicker access.
Default:
<1>
Range: A1-00 to
S6-07
–
A2-33
(126)
User Parameter
Automatic Selection
User Parms Sel
0: Disabled
1: Enabled
0: Parameters A2-01 to A2-32 are reserved for the user to create
a list of User Parameters.
1: Save history of recently viewed parameters.
Recently edited parameters will be saved to A2-17 through
A2-32 for quicker access.
Default: 1
<2>
Range: 0, 1
–
<1> Default setting value is dependent on the Application Preset selected with parameter A1-06.
<2> Default setting value is dependent on parameter A1-06. Default is 0 when A1-06 = 0, and 1 when A1-06 ≠ 0.
B.1 A: Initialization Parameters
YASKAWA ELECTRIC TOEP C710616 45F YASKAWA AC Drive – Z1000 User Manual
283
B
Parameter List

YASKAWA Z1000 Specifications

General

Model	Z1000
Category	Controller
Humidity	95% RH or less (non-condensing)
Control Method	V/F Control
Frequency Range	400 Hz
Protection	Overcurrent, Overvoltage, Undervoltage, Overheat
Communication Options	Modbus
Operating Temperature	-10 to 50°C
Storage Temperature	-20 to 60°C
Altitude	Up to 1000 meters without derating
Cooling Method	Forced Air
Enclosure Rating	IP20
Voltage Class	200V, 400V