YASKAWA Z1000 User Manual

AUTO LED HAND LED State
AUTO
Short blink (15% duty)
HAND
Off
AUTO mode, Ready, No run command input.
AUTO
Double blink
HAND
Off
AUTO mode, stopped by a Fast- Stop from a Multi-Function Digital Input.
Long blink
(50% dut y)
Double blin k
Short lin k
(15% dut y)
1 s
2 s
ON ON ON
ON ON ON ON ON ON
ON ON
Figure 4.3 AUTO LED and HAND LED Timing Status
OFF ON Blink OFF Blink OFF
Output Frequency
RUN Command
Frequency
AUTO LED
HAND Mode Selection
AUTO Mode Selection
OFF AUTOOperation Mode
OFFHAND LED
OFF
0 Hz
6 Hz
ON
Short blink
Figure 4.4 LEDs and Drive Operation in AUTO and HAND Modes
4.2 Using the HOA Keypad
110
YASKAWA ELECTRIC TOEP C710616 45F YASKAWA AC Drive – Z1000 User Manual

YASKAWA Z1000 Specifications

General

Model	Z1000
Category	Controller
Humidity	95% RH or less (non-condensing)
Control Method	V/F Control
Frequency Range	400 Hz
Protection	Overcurrent, Overvoltage, Undervoltage, Overheat
Communication Options	Modbus
Operating Temperature	-10 to 50°C
Storage Temperature	-20 to 60°C
Altitude	Up to 1000 meters without derating
Cooling Method	Forced Air
Enclosure Rating	IP20
Voltage Class	200V, 400V