YASKAWA Z1000 User Manual

□Point-To-Point, EIA 232 (Clause 10), baud rate(s):
□Point-To-Point, modem, (Clause 10), baud rate(s):
□LonTalk, (Clause 11), medium:
□Other:
Device Address Binding:
Is static device binding supported? (This is currently necessary for two-way communication with MS/TP slaves and certain
other devices.) □Yes ■ No
Networking Options:
□Router, Clause 6 - List all routing configurations, e.g., ARCNET-Ethernet, Ethernet-MS/TP, etc.
□Annex H, BACnet Tunneling Router over IP
□BACnet/IP Broadcast Management Device (BBMD)
Does the BBMD support registrations by Foreign Devices? □Yes ■ No
Character Sets Supported:
Indicating support for multiple character sets does not imply that they can all be supported simultaneously.
■ ANSI X3.4
□ IBM/Microsoft
□ DBCS
□ ISO 8859-1
□ ISO 10646 (UCS-2)
□ ISO 10646 (UCS-4)
□ JIS C 6226
If this product is a communication gateway, describe the types of non-BACnet equipment/networks(s) that the gateway
supports: Not supported
C.11 BACnet Protocol Implementation Conformance Statement
362
YASKAWA ELECTRIC TOEP C710616 45F YASKAWA AC Drive – Z1000 User Manual

YASKAWA Z1000 Specifications

General

Model	Z1000
Category	Controller
Humidity	95% RH or less (non-condensing)
Control Method	V/F Control
Frequency Range	400 Hz
Protection	Overcurrent, Overvoltage, Undervoltage, Overheat
Communication Options	Modbus
Operating Temperature	-10 to 50°C
Storage Temperature	-20 to 60°C
Altitude	Up to 1000 meters without derating
Cooling Method	Forced Air
Enclosure Rating	IP20
Voltage Class	200V, 400V