Yealink T21PE2 - Page 232

Administrator’s Guide for SIP-T2 Series/T4 Series/T5 Series/CP920 IP Phones
226
warded calls) in the call lists.
Note: To log the missed calls, “account.X.missed_calllog” should be set to 1 (Enabled).
Permitted
Values
0-Disabled, the IP phone cannot log the placed calls, received calls, missed calls and the forwarded calls
in the call lists.
1-Enabled
Default 1
Web UI Features->General Information->Save Call Log
Phone UI
T54S/T52S/T48S/T48G/T46S/T46G/T29G:
Menu->Features->Others->General->History Record
T42G/T42S/T41P/T41S/T40P/T40G/T27G/T23P/T23G/T21(P) E2/T19(P) E2/CP920:
Menu->Features->History Setting->History Record
Parameter
account.X.missed_calllog
[1]
<MAC>.cfg
Description
It enables or disables the IP phone to record missed calls.
Note: It works only if “features.save_call_history” is set to 1 (Enabled).
Permitted
Values
0-Disabled
1-Enabled
Default 1
Web UI Account->Basic->Missed Call Log
Parameter
pstn.account.X.missed_calllog
[2]
<MAC>.cfg
Description
It enables or disables the IP phone to indicate and record missed calls for PSTN account X.
Note: It works only if “features.save_call_history” is set to 1 (Enabled). The prompt message displays only
if “features.missed_call_popup.enable” is set to 1 (Enabled). It is only applicable to CP920 IP phones.
Permitted
Values
0-Disabled, the IP phone does not display a prompt message and an indicator icon on the idle screen and
log the missed call in the Missed Calls list when it misses calls.
1-Enabled, the IP phone displays a prompt message and an indicator icon on the idle screen and logs the
missed call in the Missed Calls list when it misses calls.
Default 1
Web UI Account->Basic->Missed Call Log
Parameter features.call_log_show_num <y0000000000xx>.cfg
Description
It configures the display type of the other party’s information in the call log lists.
Note: It works only if “features.save_call_history” is set to 1 (Enabled).
Permitted
Values
0-Name, the name is displayed preferentially; if there is no name, the number is displayed
1-Number
2-Name & Number, the name and number are displayed; if there is no name, the number is displayed
Default 0
Web UI Features->General Information->Call List Show Number
Parameter features.calllog_detailed_information <y0000000000xx>.cfg
Description It enables or disables the IP phone to indicate what happened to the call in the call log lists.