EasyManua.ls Logo

Yealink T21PE2 - Page 233

Yealink T21PE2
556 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Call Log
227
It is applicable to the following scenarios:
l Reject an incoming call
l Forward an incoming call
l The outgoing call is rejected
l Transfer a call
l Answer a transferred/forwarded call from the remote party; your call is transferred/forwarded to
another party.
Note: It works only if features.save_call_history” is set to 1 (Enabled).
Permitted
Values
0-Disabled
1-Enabled, you can get the detailed call-disposition information at the path via phone user interface: His-
tory->Option->Detail->Relation.
Default 1
Parameter features.save_init_num_to_history.enable <y0000000000xx>.cfg
Description It enables or disables the IP phone to log the transfer party's phone number in the call history list.
Permitted
Values
0-Disabled, the IP phone will log the transfer-to party's phone number in the call history list.
1-Enabled
Default 1
Parameter features.call_out_history_by_off_hook.enable <y0000000000xx>.cfg
Description
It enables or disables the IP phone to dial out automatically once you go off-hook or press the Speak-
erphone key in the call history list.
Permitted
Values
0-Disabled
1-Enabled
Default 0
Parameter features.call_log_merge.enable <y0000000000xx>.cfg
Description
It enables or disables the IP phone to merge the same history records.
Note: The merged entry only displays the initiation time of the last call. It is not applicable to
T48G/T46G/T42G/T41P/T29G IP phones.
Permitted
Values
0-Disabled, each call is logged individually in the calls list.
1-Enabled, consecutive incomplete calls to/from the same party and in the same direction are merged
into one record in the calls list. The merged entry displays the number of consecutive calls.
Default 0
Parameter features.local_calllog.received.replace_rule <y0000000000xx>.cfg
Description
It configures the string of the digit map to be applied to the numbers dialed from the call history list.
Example:
features.local_calllog.received.replace_rule = <00:+>x.|<5:1>xx
When you call the contact 001234567 from the call history list, the number +1234567 will be dialed out
because "001234567" matches the "<00:+>x." in the digit map;
When you call the contact 532 from the call history list, the number 132 will be dialed out because "532"
matches the "<5:1>xx" in the digit map.
Note: The records in the Placed Calls are not matched.

Table of Contents

Related product manuals