Yealink T21PE2 - Page 250

Administrator’s Guide for SIP-T2 Series/T4 Series/T5 Series/CP920 IP Phones
244
Web UI Directory->LDAP->Server Address
Parameter ldap.port <y0000000000xx>.cfg
Description
It configures the port of the LDAP server.
Example:
ldap.port = 389
Permitted
Values
Integer from 1 to 65535
Default 389
Web UI Directory->LDAP->Port
Parameter ldap.base <y0000000000xx>.cfg
Description
It configures the LDAP search base which corresponds to the location of the LDAP phonebook from
which the LDAP search request begins. The search base narrows the search scope and decreases directory
search time.
Example:
ldap.base = dc=yealink,dc=cn
Permitted
Values
String within 99 characters
Default Blank
Web UI Directory->LDAP->Base
Parameter ldap.user <y0000000000xx>.cfg
Description
It configures the user name used to log into the LDAP server.
This parameter can be left blank in case the server allows anonymity to log into. Otherwise you will need
to provide the user name to log into the LDAP server.
Example:
ldap.user = cn=manager,dc=yealink,dc=cn
Permitted
Values
String within 99 characters
Default Blank
Web UI Directory->LDAP->Username
Parameter ldap.password <y0000000000xx>.cfg
Description
It configures the password to log into the LDAP server.
This parameter can be left blank in case the server allows anonymous to log into. Otherwise you will need
to provide the password to log into the LDAP server.
Example:
ldap.password = secret
Permitted
Values
String within 99 characters