Yealink T21PE2 - Page 251

Directory
245
Default Blank
Web UI Directory->LDAP->Password
Parameter ldap.max_hits <y0000000000xx>.cfg
Description
It configures the maximum number of search results to be returned by the LDAP server. If the value of the
“Max.Hits” is blank, the LDAP server will return all searched results. Please note that a very large value of
the “Max. Hits” will slow down the LDAP search speed, therefore it should be configured according to the
available bandwidth.
Example:
ldap.max_hits = 50
Permitted
Values
Integer from 1 to 1000
Default 50
Web UI Directory->LDAP->Max Hits (1~1000)
Parameter ldap.name_attr <y0000000000xx>.cfg
Description
It configures the name attributes of each record to be returned by the LDAP server. It compresses the
search results. You can configure multiple name attributes separated by spaces.
Example:
ldap.name_attr = cn sn
This requires the “cn” and “sn” attributes set for each contact record on the LDAP server.
Permitted
Values
String within 99 characters
Default Blank
Web UI Directory->LDAP->LDAP Name Attributes
Parameter ldap.numb_attr <y0000000000xx>.cfg
Description
It configures the number attributes of each record to be returned by the LDAP server. It compresses the
search results. You can configure multiple number attributes separated by spaces.
Example:
ldap.numb_attr = mobile ipPhone
This requires the “mobile” and “ipPhone” attributes set for each contact record on the LDAP server.
Permitted
Values
String within 99 characters
Default Blank
Web UI Directory->LDAP->LDAP Number Attributes
Parameter ldap.display_name <y0000000000xx>.cfg
Description
It configures the display name of the contact record displayed on the phone screen.
The value must start with “%” symbol.
Example: