Yealink T21PE2 - Page 377

Audio Features
371
Values
Default 0
Web UI Settings->Voice Monitoring->Display Report options on Web
Parameter phone_setting.vq_rtcpxr.states_show_on_gui.enable <y0000000000xx>.cfg
Description
It enables or disables the voice quality data of the last call or current call to be displayed on the phone
screen. You can view the voice quality data of the last call on the phone at the path Menu->Status-
>More->RTP (RTP Status). You can view the voice quality data of the current call by pressing RTP/RTP
Status soft key during a call.
Permitted
Values
0-Disabled
1-Enabled
Default 0
Web UI Settings->Voice Monitoring->Display Report options on phone
Parameter phone_setting.vq_rtcpxr_display_start_time.enable <y0000000000xx>.cfg
Description
It enables or disables the phone to display Start Time on the phone screen.
Note: It works only if “phone_setting.vq_rtcpxr.states_show_on_gui.enable” is set to 1 (Enabled).
Permitted
Values
0-Disabled
1-Enabled
Default 1
Web UI Settings->Voice Monitoring->Report options on phone->Start Time
Parameter phone_setting.vq_rtcpxr_display_stop_time.enable <y0000000000xx>.cfg
Description
It enables or disables the phone to display Current Time or Stop Time on the phone screen.
Note: It works only if “phone_setting.vq_rtcpxr.states_show_on_gui.enable” is set to 1 (Enabled).
Permitted
Values
0-Disabled
1-Enabled
Default 1
Web UI Settings->Voice Monitoring->Report options on phone->Current Time
Parameter phone_setting.vq_rtcpxr_display_local_call_id.enable <y0000000000xx>.cfg
Description
It enables or disables the phone to display Local User on the phone screen.
Note: It works only if “phone_setting.vq_rtcpxr.states_show_on_gui.enable” is set to 1 (Enabled).
Permitted
Values
0-Disabled
1-Enabled
Default 1
Web UI Settings->Voice Monitoring->Report options on phone->Local User
Parameter
phone_setting.vq_rtcpxr_display_remote_call_id.en-
able
<y0000000000xx>.cfg
Description
It enables or disables the phone to display Remote User on the phone screen
Note: It works only if “phone_setting.vq_rtcpxr.states_show_on_gui.enable” is set to 1 (Enabled).
Permitted
0-Disabled