EasyManua.ls Logo

Yealink T21PE2 - Page 378

Yealink T21PE2
556 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Administrators Guide for SIP-T2 Series/T4 Series/T5 Series/CP920 IP Phones
372
Values 1-Enabled
Default 1
Web UI Settings->Voice Monitoring->Report options on phone->Remote User
Parameter phone_setting.vq_rtcpxr_display_local_codec.enable <y0000000000xx>.cfg
Description
It enables or disables the phone to display Local Codec on the phone screen
Note: It works only if phone_setting.vq_rtcpxr.states_show_on_gui.enable” is set to 1 (Enabled).
Permitted
Values
0-Disabled
1-Enabled
Default 1
Web UI Settings->Voice Monitoring->Report options on phone->Local Codec
Parameter
phone_setting.vq_rtcpxr_display_remote_codec.en-
able
<y0000000000xx>.cfg
Description
It enables or disables the phone to display Remote Codec on the phone screen
Note: It works only if phone_setting.vq_rtcpxr.states_show_on_gui.enable” is set to 1 (Enabled).
Permitted
Values
0-Disabled
1-Enabled
Default 1
Web UI Settings->Voice Monitoring->Report options on phone->Remote Codec
Parameter phone_setting.vq_rtcpxr_display_jitter.enable <y0000000000xx>.cfg
Description
It enables or disables the phone to display Jitter on the phone screen.
Note: It works only if phone_setting.vq_rtcpxr.states_show_on_gui.enable” is set to 1 (Enabled).
Permitted
Values
0-Disabled
1-Enabled
Default 1
Web UI Settings->Voice Monitoring->Report options on phone->Jitter
Parameter
phone_setting.vq_rtcpxr_display_jitter_buffer_
max.enable
<y0000000000xx>.cfg
Description
It enables or disables the phone to display Jitter Buffer Max on the phone screen.
Note: It works only if phone_setting.vq_rtcpxr.states_show_on_gui.enable” is set to 1 (Enabled).
Permitted
Values
0-Disabled
1-Enabled
Default 1
Web UI Settings->Voice Monitoring->Report options on phone->Jitter Buffer Max
Parameter
phone_setting.vq_rtcpxr_display_packets_lost.en-
able
<y0000000000xx>.cfg
Description
It enables or disables the phone to display Packets lost on the phone screen.
Note: It works only if phone_setting.vq_rtcpxr.states_show_on_gui.enable” is set to 1 (Enabled).
Permitted
Values
0-Disabled
1-Enabled

Table of Contents

Related product manuals