Yealink T21PE2 - Page 417

Advanced Features
411
lines.
The following table lists the parameters you can use to configure BLF List.
Parameter
account.X.blf.blf_list_uri
[1]
<MAC>.cfg
Description
It configures the BLF List URI to monitor a list of users for account X.
Example:
account.1.blf.blf_list_uri = 4609@pbx.test.com
Note: It is not applicable to T19(P) E2/CP920 IP phones.
Permitted
Values
SIP URI within 256 characters
Default Blank
Web UI Account->Advanced->BLF List URI
Parameter
account.X.blf_list_code
[1]
<MAC>.cfg
Description
It configures the feature access code that initiates a directed call pickup for account X.
Example:
account.1.blf_list_code = *97
Note: It is not applicable to T19(P) E2/CP920 IP phones.
Permitted
Values
String within 32 characters
Default Blank
Web UI Account->Advanced->BLF List Pickup Code
Parameter
account.X.blf_list_barge_in_code
[1]
<MAC>.cfg
Description
It configures the feature access code of directed call pickup with barge-in for account X.
Example:
account.1.blf_list_barge_in_code = *33
Note: It is not applicable to T19(P) E2/CP920 IP phones.
Permitted
Values
String within 32 characters
Default Blank
Web UI Account->Advanced->BLF List Barge in Code
Parameter
account.X.blf_list_call_parked_code
[1]
<MAC>.cfg
Description
It configures the feature access code of call park for account X.
Example:
account.1.blf_list_call_parked_code = *68
Note: It is not applicable to CP920/T48G/T46G/T42G/T41P/T29G/T19(P) E2 IP phones.
Permitted
Values
String within 32 characters