Yealink T21PE2 - Page 418

Administrator’s Guide for SIP-T2 Series/T4 Series/T5 Series/CP920 IP Phones
412
Default Blank
Web UI Account->Advanced->BLF List Call Parked Code
Parameter
account.X.blf_list_call_parked_list
[1]
<MAC>.cfg
Description
It configures the serial numbers of the monitored users in the BLF list where you can park the active call
for account X.
Multiple serial numbers are separated by commas.
Example:
account.1.blf_list_call_parked_list =
When you leave it blank, you cannot park the active call to any monitored user.
account.1.blf_list_call_parked_list = all
You can park the active call to any monitored user.
account.1.blf_list_call_parked_list = 1,3,4
You can park the active call to the first, third or fourth monitored user in the BLF list.
Note: This parameter has a higher priority than “transfer.dsskey_deal_type”, so that when you press the
BLF list key during a call, the phone parks a call other than transferring the call. It works only if “accoun-
t.X.blf_list_call_parked_code” is configured. It is not applicable to CP920/T48G/T46G/T42G/T41P/T29G/T19
(P) E2 IP phones.
Permitted
Values
Blank
all
serial numbers of monitored users in the BLF list
Default Blank
Parameter
account.X.blf_list_retrieve_call_parked_code
[1]
<MAC>.cfg
Description
It configures the feature access code that initiates retrieval of a parked call on the monitored user.
Example:
account.1.blf_list_retrieve_call_parked_code = *88
Note: It is not applicable to T19(P) E2/CP920 IP phones.
Permitted
Values
String within 32 characters
Default Blank
Web UI Account->Advanced->BLF List Retrieve Call Parked Code
Parameter phone_setting.auto_blf_list_enable <y0000000000xx>.cfg
Description
It enables or disables the IP phone to automatically configure the BLF list DSS keys in order.
Note: It is not applicable to T19(P) E2/CP920 IP phones.
Permitted
Values
0-Disabled
1-Enabled
Default 1