Yealink T21PE2 - Page 493

Configuration Parameters
487
Example:
account.1.xsi.password = 123456
Note: It works only if “sip.authentication_for_xsi” is set to 0 (User Login Credentials for XSI Authentic-
ation) and “bw.xsi.enable" is set to 1 (Enabled).
Permitted
Values
String within 99 characters
Default Blank
Web UI Applications->Broadsoft XSI->XSI Account->Password (if bw.enable =1)
Parameter
account.X.xsi.host
[1]
<MAC>.cfg
Description
It configures the IP address or domain name of the Xtended Services Platform server.
Example:
account.1.xsi.host = xsp1.iop1.broadworks.net
Note: It works only if “bw.xsi.enable" is set to 1 (Enabled).
Permitted
Values
IP address or domain name
Default Blank
Web UI Applications->Broadsoft XSI->XSI Account->Host Server (if bw.enable =1)
Parameter
account.X.xsi.server_type
[1]
<MAC>.cfg
Description
It configures the access protocol of the Xtended Services Platform server.
Example:
account.1.xsi.server_type = HTTP
Note: It works only if “bw.xsi.enable" is set to 1 (Enabled).
Permitted
Values
HTTP or HTTPS
Default HTTP
Web UI Applications->Broadsoft XSI->XSI Account->XSI Server Type (if bw.enable =1)
Parameter
account.X.xsi.port
[1]
<MAC>.cfg
Description
It configures the port of the Xtended Services Platform server.
Example:
account.1.xsi.port = 80
Note: It works only if “bw.xsi.enable" is set to 1 (Enabled).
Permitted
Values
Integer from 1 to 65535
Default 80
Web UI Applications->Broadsoft XSI->XSI Account->Port (if bw.enable =1)
Parameter
bw.xsi.enable
[2]
<y0000000000xx>.cfg