Yealink T21PE2 - Page 494

Administrator’s Guide for SIP-T2 Series/T4 Series/T5 Series/CP920 IP Phones
488
Description It enables or disables the XSI authentication feature for the IP phone.
Permitted
Values
0-Disabled
1-Enabled
If it is set to 0 (Disabled), the following features are unavailable on the phone:
BroadWorks Anywhere
Remote Office
Line ID Blocking
Anonymous Call Rejection
Simultaneous Ring Personal
BroadSoft Directory
BroadSoft Call Log
Call Park Feature via XSI Mode
Call Waiting Feature via XSI Mode
Voice Messaging/Video Voice Messaging
Centralized Call Recording
Executive and Assistant
BroadWorks Mobility
Group Night Forwarding
Silent Altering
Default 0
Parameter sip.authentication_for_xsi <y0000000000xx>.cfg
Description
It configures the authentication mechanism for the XSI access.
Note: It works only if “bw.xsi.enable” is set to 1 (Enabled).
Permitted
Values
0-User Login Credentials for XSI Authentication), the IP phone uses the XSI user ID and password for XSI
authentication.
1-SIP Credentials for XSI Authentication, the IP phone uses the XSI user ID, the register name and pass-
word of the SIP account for XSI authentication.
Default 0
Web UI Applications->Broadsoft XSI->XSI Account->Allow SIP Authentication for XSI (if bw.enable=1)
Parameter default_input_method.xsi_password <y0000000000xx>.cfg
Description
It configures the default input method when the XSI authentication is failed and the user re-enters the
password.
Permitted
Values
123, abc, ABC or 2aB
Default 2aB