Yealink W53P - Key as Send; Key as Send Configuration; Recent Call Display in Dialing; Recent Call in Dialing Configuration

Handset Customization
93
Description
It configures the selected line information displayed on the pre-dialing or dialing screen.
Note: It works only if “features.station_name.value” is left blank.
Permitted Values
1-Label, configured by the parameter “account.X.label”.
2-Display Name, configured by the parameter “account.X.display_name”.
3-User Name, configured by the parameter “account.X.user_name”.
Default 3
Web UI Features->General Information->Display Method on Dialing
Key As Send
Key as send allows you to assign the pound key (“#”) or asterisk key (“*”) as the send key.
Topic
Key As Send Configuration
Key As Send Configuration
The following table lists the parameters you can use to configure key as send.
Parameter features.key_as_send <y0000000000xx>.cfg
Description It configures the "#" or "*" key as the send key.
Permitted Values
0-Disabled, neither “#” nor “*” can be used as the send key.
1-# key, the pound key is used as the send key.
2-* key, the asterisk key is used as the send key.
Default 1
Web UI Features->General Information->Key As Send
Recent Call Display in Dialing
Recent call display allows you to view the placed calls list when the phone is on the dialing screen . You can select to
place a call from the placed calls list.
Topic
Recent Call in Dialing Configuration
Recent Call in Dialing Configuration
The following table lists the parameter you can use to configure the recent call display in dialing.
Parameter super_search.recent_call <y0000000000xx>.cfg
Description It enables or disables Recent Call in Dialing feature.
Permitted Values
0-Disabled
1-Enabled, users can view the placed calls list when the phone is on the dialing screen.