Yealink W53P

Administrator’s Guide for W60P/W53P/W41P DECT Phones
94
Default 1
Web UI Directory->Setting->Recent Call In Dialing
Warnings Display
Yealink IP phones support displaying the warning details about the issue on the Status screen when the default pass-
word is used.
Topics
Warnings Display Configuration
Warnings Display Configuration
The following table lists the parameter you can use to configure the warnings display.
Parameter phone_setting.warnings_display.mode <y0000000000xx>.cfg
Description
It enables or disables the phone to display warnings on the phone when the default password is in
use.
Permitted Val-
ues
0-Disabled
1-Enabled
Default 1