Administrator’s Guide for W60P/W53P/W41P DECT Phones
36
Web UI Network->Advanced->802.1x->Identity
Parameter
static.network.802_1x.md5_password
[1]
<y0000000000xx>.cfg
Description
It configures the password for 802.1x authentication.
Example:
static.network.802_1x.md5_password = admin123
Note: It works only if “static.network.802_1x.mode” is set to 1, 3, 4, 5, 6 or 7.
Permitted
Values
String within 32 characters
Default Blank
Web UI Network->Advanced->802.1x->MD5 Password
Parameter static.network.802_1x.root_cert_url <y0000000000xx>.cfg
Description
It configures the access URL of the CA certificate.
Example:
static.network.802_1x.root_cert_url = http://192.168.1.10/ca.pem
Note: It works only if “static.network.802_1x.mode” is set to 2, 3, 4, 5, 6 or 7. If the authentication method
is EAP-FAST, you also need to set “static.network.802_1x.eap_fast_provision_mode” to 1 (Authenticated
Provisioning). The format of the certificate must be *.pem, *.crt, *.cer or *.der.
Permitted
Values
URL within 511 characters
Default Blank
Web UI Network->Advanced->802.1x->CA Certificates
Parameter static.network.802_1x.client_cert_url <y0000000000xx>.cfg
Description
It configures the access URL of the device certificate.
Example:
static.network.802_1x.client_cert_url = http://192.168.1.10/client.pem
Note: It works only if “static.network.802_1x.mode” is set to 2 (EAP-TLS). The format of the certificate
must be *.pem.
Permitted
Values
URL within 511 characters
Default Blank
Web UI Network->Advanced->802.1x->Device Certificates
[1]
If you change this parameter, the IP phone will reboot to make the change take effect.
TR-069 Device Management
TR-069 is a technical specification defined by the Broadband Forum, which defines a mechanism that encompasses
secure auto-configuration of a CPE (Customer-Premises Equipment), and incorporates other CPE management func-
tions into a common framework. TR-069 uses common transport mechanisms (HTTP and HTTPS) for communication
To Next Page
Loading...
