Yealink W53P

Administrator’s Guide for W60P/W53P/W41P DECT Phones
206
Permitted Val-
ues
String within 32 characters
Default Blank
Web UI Features->Call Pickup->Call Park Code
Parameter features.call_park.park_retrieve_code <y0000000000xx>.cfg
Description
It configures the park retrieve code for FAC call park mode, or configures retrieve parking lot for Trans-
fer call park mode.
Permitted Val-
ues
String within 32 characters
Default Blank
Web UI Features->Call Pickup->Park Retrieve Code
Shared Line
Yealink IP phones support Shared Call Appearance (SCA) to share a line. Shared call appearances enable more than one
phone to share the same line or registration. The methods you use vary with the SIP server you are using.
The shared line users have the ability to do the following:
l Place and answer calls
l Place a call on hold
l Retrieve a held call remotely
l Barge in an active call
l Pull a shared call
Topic
Shared Call Appearance (SCA) Configuration
Shared Call Appearance (SCA) Configuration
In SCA scenario, an incoming call can be presented to multiple phones simultaneously. Any IP phone can be used to
originate or receive calls on the shared line.
Yealink IP phones support SCA using a SUBSCRIBE/NOTIFY mechanism as specified in RFC 3265. The events used are:
l “call-info” for call appearance state notification.
l “line-seize” for the IP phone to ask to seize the line.
Topic
SCA Configuration
SCA Configuration
The following table lists the parameters you can use to configure SCA.
Parameter
account.X.shared_line
[1]
<MAC>.cfg
Description It configures the registration line type.
Permitted Val-
ues
0-Disabled
1-Shared Call Appearance