Yealink W53P

Audio Features
183
value of one way delay computed by the phone is less than 500, the phone will not send a critical alert
quality report to the central report collector.
If it is set to blank, critical alerts are not generated due to one-way delay. One-way delay includes both
network delay and end system delay.
Permitted
Values
10 to 2000
Default Blank
Web UI Settings->Voice Monitoring->Critical threshold for Delay
VQ-RTCPXR Display
You can check the voice quality data of the last call via web user interface.
Topic
VQ-RTCPXR Display Configuration
VQ-RTCPXR Display Configuration
The following table lists the parameters you can use to configure VQ-RTCPXR display.
Parameter
phone_setting.vq_rtcpxr.states_show_on_web.en-
able
<y0000000000xx>.cfg
Description
It enables or disables the voice quality data of the last call to be displayed on the web interface at the
path Status->RTP Status.
Permitted Val-
ues
0-Disabled
1-Enabled
Default 0
Web UI Settings->Voice Monitoring->Display Report options on Web
Central Report Collector
To operate with central report collector, IP phones must be configured to forward their voice quality reports to the spe-
cified report collector. You can specify the report collector on a per-line basis.
Topic
Central Report Collector Configuration
Central Report Collector Configuration
The following table lists the parameters you can use to configure central report collector.
Parameter
account.X.vq_rtcpxr.collector_name
[1]
<MAC>.cfg
Description
It configures the host name of the central report collector that accepts voice quality reports contained
in SIP PUBLISH messages.
Permitted Val-
ues
String within 32 characters
Default Blank
Web UI Account->Advanced->VQ RTCP-XR Collector Name
Parameter
account.X.vq_rtcpxr.collector_server_host
[1]
<MAC>.cfg