Handset Customization
91
<item id_name="calllog_search" display_name="History" priority="2" enable="0" />
3. Save the change and place this file to the provisioning server.
Search Source List Configuration
The following table lists the parameters you can use to configure the search source list.
Parameter super_search.url <y0000000000xx>.cfg
Description
It configures the access URL of the super search template file.
Example:
super_search.url = http://192.168.1.20/super_search.xml
During auto provisioning, the IP phone connects to the provisioning server “192.168.1.20”, and down-
loads the super search template file “super_search.xml”.
Permitted
Values
URL within 511 characters
Default Blank
Web UI Directory->Setting->Search Source List In Dialing
Parameter search_in_dialing.history.enable <y0000000000xx>.cfg
Description
It enables or disables the IP phone to automatically search entries from the call log list, and display results
on the pre-dialing/dialing screen.
Permitted
Values
0-Disabled
1-Enabled
Default 1
Call Display
By default, the IP phones present the contact information when receiving an incoming call, dialing an outgoing call or
engaging in a call.
You can configure what contact information presents and how to display the contact information. If the contact exists
in the phone directory, the phone displays the saved contact name and number. If not, it will use Calling Line Iden-
tification Presentation (CLIP) or Connected Line Identification Presentation (COLP) to display the contact’s identity.
Topic
Call Display Configuration
Call Display Configuration
The following table lists the parameters you can use to configure call display.
Parameter phone_setting.called_party_info_display.enable <y0000000000xx>.cfg
Description
It enables or disables the IP phone to display the local identity when it receives an incoming call.
Note: The information display method is configured by the parameter “phone_setting.call_info_display_
method”.
Permitted
Values
0-Disabled
1-Enabled
To Next Page
Loading...
