Yealink W53P

Handset Customization
83
Permitted
Values
IP address or domain name
Default pool.ntp.org
Web UI Settings->Time&Date->Secondary Server
Parameter local_time.interval <y0000000000xx>.cfg
Description It configures the interval (in seconds) at which the phone updates time and date from the NTP server.
Permitted
Values
Integer from 15 to 86400
Default 1000
Web UI Settings->Time&Date->Update Interval (15~86400s)
Parameter local_time.time_zone <y0000000000xx>.cfg
Description It configures the time zone.
Permitted
Values
-12 to +14
For available time zones, refer to Time Zone.
Default +8
Web UI Settings->Time&Date->Time Zone
Parameter local_time.time_zone_name <y0000000000xx>.cfg
Description
It configures the time zone name.
Note: It works only if “local_time.summer_time” is set to 2 (Automatic) and the parameter “local_time.-
time_zone” should be configured in advance.
Permitted
Values
String within 32 characters
The available time zone names depend on the time zone configured by the parameter “local_time.time_
zone”. For available time zone names, refer to Time Zone.
Default China(Beijing)
Web UI Settings->Time&Date->Location
DST Settings
You can set DST for the desired area as required. By default, the DST is set to Automatic, so it can be adjusted auto-
matically from the current time zone configuration.
The time zone and corresponding DST pre-configurations exist in the AutoDST file. If the DST is set to Automatic, the IP
phone obtains the DST configuration from the AutoDST file.
You can customize the AutoDST file if required. The AutoDST file allows you to add or modify time zone and DST set-
tings for your area each year.
Topics
Auto DST File Attributes
Customizing Auto DST File
Auto DST File Attributes
The following table lists the description of each attribute in the template file: