Yealink W53P

Administrator’s Guide for W60P/W53P/W41P DECT Phones
78
Custom Language for Web Display Configuration
If you want to add a new language (for example, Wuilan) to IP phones, prepare the language file named as
“12.Wuilan.js” for downloading. After the update, you will find a new language selection “Wuilan” at the top-right
corner of the web user interface.
The following table lists the parameters you can use to configure a custom language for web display.
Parameter wui_lang.url <y0000000000xx>.cfg
Description It configures the access URL of the custom language pack for the web user interface.
Permitted Val-
ues
URL within 511 characters
For example: http://localhost/X.GUI.name.lang
X starts from 012, “name” is replaced with the language name
Default Blank
Parameter wui_lang.delete <y0000000000xx>.cfg
Description
It deletes the specified or all custom web language packs and note language packs of the web user
interface.
Permitted Val-
ues
http://localhost/all or http://localhost/Y.name.js
Default Blank
Time and Date
Yealink IP phones maintain a local clock. You can choose to get the time and date from SNTP (Simple Network Time
Protocol) time server to have the most accurate time and set DST (Daylight Saving Time) to make better use of daylight
and to conserve energy, or you can set the time and date manually. The time and date can be displayed in several
formats on the idle screen.
Topics
Time Zone
NTP Settings
DST Settings
Time and Date Manually Configuration
Time and Date Format Configuration
Date Customization Rule
Time Zone
The following table lists the values you can use to set the time zone location.
Time Zone Time Zone Name Time Zone Time Zone Name
-12 Eniwetok,Kwajalein +2 Estonia(Tallinn)
-11 Midway Island +2 Finland(Helsinki)
-11 Samoa +2 Gaza Strip(Gaza)
-10 United States-Hawaii-Aleutian +2 Greece(Athens)
-10 United States-Alaska-Aleutian +2 Israel(Tel Aviv)