Yealink W53P

Administrator’s Guide for W60P/W53P/W41P DECT Phones
190
Default 0000
Web UI Security->Base PIN->Base Unit PIN
Handset UI OK->Settings->System Settings->Change Base PIN
DD Phone
UI
Menu->Settings->Advanced Settings (default password: 0000) ->Change Password
Parameter base.double_pin_code.enable <y0000000000xx>.cfg
Description It enables or disables double PIN feature.
Permitted
Values
0-Disabled, users use the PIN configured by "base.pin_code" to register the handset or access some fea-
tures.
1-Enabled, users use the PIN configured by "base.pin_code_for_register" to register the handset, and use
the PIN configured by "base.pin_code" to access some features.
Default 0
Parameter base.pin_code_for_register <y0000000000xx>.cfg
Description
It configures the PIN for registering or de-registering a handset.
Note: It works only if “base.double_pin_code.enable” is set to 1 (Enabled).
Permitted
Values
Integer from 0000 to 9999
Default 0000
Emergency Number
Public telephone networks in countries around the world have a single emergency telephone number (emergency ser-
vices number), that allows a caller to contact local emergency services for assistance when necessary.
You can specify the emergency numbers for contacting the emergency services in an emergency situation. The emer-
gency telephone number may differ from country to country. It is typically a three-digit number so that it can be easily
remembered and dialed quickly.
You can dial these numbers when the phone is locked.
Topic
Emergency Number Configuration
Emergency Number Configuration
The following table lists the parameter you can use to configure the emergency number.
Parameter phone_setting.emergency.number <y0000000000xx>.cfg
Description
It configures emergency numbers.
Multiple emergency numbers are separated by commas.
Permitted Values String within 99 characters
Default 112,911,110
Web UI Features->Phone Lock->Emergency