Yealink W53P

Administrator’s Guide for W60P/W53P/W41P DECT Phones
62
Parameter static.auto_provision.custom.handset.protect <y0000000000xx>.cfg
Description
It enables or disables the handsets to keep user personalized settings after auto provisioning/handset
reboot/handset registration.
Note: It works only if "static.auto_provision.handset_configured.enable" is set to 0 (Disabled). It is only
applicable to the custom handset related configurations. It is not applicable to DD phones.
Permitted
Values
0-Disabled
1-Enabled
Default 1
Auto Provisioning Flowchart for Keep User’s Personalized Configuration
Settings
The following shows auto provisioning flowchart for Yealink IP phones when a user wishes to keep user’s personalized
configuration settings.