Yealink W53P

Phone Provisioning
61
Note: The provisioning priority mechanism (handset/web user interface >central provisioning >factory
defaults) takes effect only if the value of this parameter is set to 1 (Enabled). If “overwrite_mode” is set to
1 in the boot file, the value of this parameter will be set to 1 (Enabled). It is not applicable to the custom
handset related configurations.
Permitted
Values
0-Disabled
1-Enabled, <MAC>-local.cfg file generates and personalized non-static settings configured via the web
or handset user interface will be kept after auto provisioning.
Default 0
Parameter static.auto_provision.custom.sync <y0000000000xx>.cfg
Description
It enables or disables the IP phone to upload the <MAC>-local.cfg file to the server each time the file
updates, and to download the <MAC>-local.cfg file from the server during auto provisioning.
Note: It works only if “static.auto_provision.custom.protect” is set to 1 (Enabled). The upload/download
path is configured by the parameter “static.auto_provision.custom.sync.path”.
Permitted
Values
0-Disabled
1-Enabled
Default 0
Parameter static.auto_provision.custom.sync.path <y0000000000xx>.cfg
Description
It configures the URL for uploading/downloading the <MAC>-local.cfg file.
If it is left blank, the IP phone will try to upload/download the <MAC>-local.cfg file to/from the pro-
visioning server.
Note: It works only if “static.auto_provision.custom.sync" is set to 1 (Enabled).
Permitted
Values
URL
Default Blank
Parameter
static.auto_provision.custom.upload_method
[1]
<y0000000000xx>.cfg
Description
It configures the way the IP phone uploads the <MAC>-local.cfg file, <MAC>-calllog.xml file or <MAC>-
contact.xml file to the provisioning server (for HTTP/HTTPS server only).
Permitted
Values
0-PUT
1-POST
Default 0
Parameter static.auto_provision.handset_configured.enable <y0000000000xx>.cfg
Description
It enables or disables the base station to deliver custom handset configurations to the handset via auto
provisioning/handset reboot/handset registration.
Note: It is only applicable to the custom handset related configurations.
Permitted
Values
0-Disabled, the custom handset settings can be only changed via handset user interface.
1-Enabled, when the parameter "static.auto_provision.custom.handset.protect" is set to 0 (Disabled), the
personalized handset settings will be overridden; if the parameter "static.auto_pro-
vision.custom.handset.protect" is set to 1 (Enabled), the personalized handset settings will not be over-
ridden.
Default 1