Yealink W53P

Configuration Parameters
223
BroadWorks Anywhere
Remote Office
Line ID Blocking
Anonymous Call Rejection
Simultaneous Ring Personal
BroadSoft Directory
BroadSoft Call Log
Call Park Feature via XSI Mode
Call Waiting Feature via XSI Mode
Voice Messaging/Video Voice Messaging
Silent Altering
Default 0
Parameter sip.authentication_for_xsi <y0000000000xx>.cfg
Description
It configures the authentication mechanism for the XSI access.
Note: It works only if “bw.xsi.enable” is set to 1 (Enabled).
Permitted
Values
0-User Login Credentials for XSI Authentication), the IP phone uses the XSI user ID and password for XSI
authentication.
1-SIP Credentials for XSI Authentication, the IP phone uses the XSI user ID, the register name and pass-
word of the SIP account for XSI authentication.
Default 0
Web UI Applications->Broadsoft XSI->XSI Account->Allow SIP Authentication for XSI (if bw.enable=1)
Parameter default_input_method.xsi_password <y0000000000xx>.cfg
Description
It configures the default input method when the XSI authentication is failed and the user re-enters the
password.
Permitted
Values
123, abc, ABC or Abc
Default Abc
[1]
X is the account ID. X=1-8.
[2]
If you change this parameter, the IP phone will reboot to make the change take effect.
Broadsoft Network Directory
Parameter bw.xsi.directory.enable <y0000000000xx>.cfg
Description
It enables or disables the network directory feature for the IP phone.
Note: It works only if “bw.xsi.enable" is set to 1 (Enabled).
Permitted Values
0-Disabled
1-Enabled