Yealink W53P

Audio Features
181
l Computed using other metrics as input, such as listening Mean Opinion Score (MOS-LQ) and conversational Mean
Opinion Score (MOS-CQ).
Topics
Voice Quality Reports
VQ-RTCPXR Display
Central Report Collector
Voice Quality Reports
Three types of quality reports can be enabled:
l Session: Generated at the end of a call.
l Interval: Generated during a call at a configurable period.
l Alert: Generated when the call quality degrades below a configurable threshold.
Topic
Voice Quality Reports Configuration
Voice Quality Reports Configuration
The following table lists the parameters you can use to configure the service quality reports.
Parameter phone_setting.vq_rtcpxr.session_report.enable <y0000000000xx>.cfg
Description
It enables or disables the IP phone to send a session quality report to the central report collector at the
end of each call.
Permitted
Values
0-Disabled
1-Enabled
Default 0
Web UI Settings->Voice Monitoring->VQ RTCP-XR Session Report
Parameter phone_setting.vq_rtcpxr.interval_report.enable <y0000000000xx>.cfg
Description
It enables or disables the IP phone to send an interval quality report to the central report collector peri-
odically throughout a call.
Permitted
Values
0-Disabled
1-Enabled
Default 0
Web UI Settings->Voice Monitoring->VQ RTCP-XR Interval Report
Parameter phone_setting.vq_rtcpxr_interval_period <y0000000000xx>.cfg
Description
It configures the interval (in seconds) for the IP phone to send an interval quality report to the central
report collector periodically throughout a call.
Note: It works only if “phone_setting.vq_rtcpxr.interval_report.enable” is set to 1 (Enabled).
Permitted
Values
Integer from 5 to 20
Default 20
Web UI Settings->Voice Monitoring->Period for Interval Report
Parameter phone_setting.vq_rtcpxr_moslq_threshold_warning <y0000000000xx>.cfg