Administrator’s Guide for W60P/W53P/W41P DECT Phones
50
[1]
If you change this parameter, the IP phone will reboot to make the change take effect.
Navigating the Web User Interface
When you log into the web user interface successfully, the phone status is displayed on the first page of the web user
interface. You can click the navigation bar to customize or click Log Out to log out of the web user interface.
The following figure is an example when you navigate to Settings->Preference:
Central Provisioning
Central provisioning enables you to provision multiple phones from a provisioning server that you set up, and maintain
a set of boot files, configuration files and resource files for all phones in the central provisioning server.
The following figure shows how the phone interoperates with provisioning server when you use the centralized pro-
visioning method:
Yealink IP phones can obtain the provisioning server address during startup. Then IP phones first download boot files
and configuration files from the provisioning server, and then resolve and update the configurations written in con-
figuration files. This entire process is called auto provisioning. For more information on auto provisioning, refer to
Yealink_SIP_IP_Phones_Auto_Provisioning_Guide.
The IP phones can be configured to upload log files (log files provide a history of phone events), call log files and con-
tact files to the provisioning server. You can also configure a directory for each of these three files respectively.
Topics
Auto Provisioning Settings Configuration
User-Triggered Provisioning Settings Configuration
To Next Page
Loading...
