Yealink W53P

Configuration Parameters
227
Default 0
Web UI Features->Call Pickup->Visual Alert for Parked Call (if bw.enable =1)
Parameter features.call_park.group_park_code <y0000000000xx>.cfg
Description
It configures the group call park code for the GPark option.
Note: It works only if “features.call_park.park_mode” is set to 1 (FAC).
Permitted Values String within 32 characters
Default Blank
Web UI Features->Call Pickup->Group Call Park Code (if bw.enable =1)
Parameter
account.X.callpark_enable
[2]
<MAC>.cfg
Description It enables or disables call park subscription.
Permitted Values
0-Disabled
1-Enabled
Default 1
[1]
If you change this parameter, the IP phone will reboot to make the change take effect.
[1]
X is the account ID. X=1-8.
Call Waiting Sync
Parameter call_waiting.mode <y0000000000xx>.cfg
Description
It configures the call waiting mode.
Note: If it is set to 1 (XSI), it works only if “bw.xsi.enable" is set to 1 (Enabled).
Permitted Val-
ues
0-Local
1-XSI, the status of the call waiting feature between the IP phone and the BroadWorks server can be
synchronized.
Default 0
Ethernet Interface MTU Parameter
Parameter
static.network.mtu_value
[1]
<y0000000000xx>.cfg
Description It configures the MTU (Maximum Transmission Unit) of network interface card.
Permitted Values Integer from 128 to 1500
Default 1500
[1]
If you change this parameter, the IP phone will reboot to make the change take effect.
SIP Settings Parameters
Parameter
account.X.custom_ua
[1]
<MAC>.cfg
Description It configures the suffix of User-Agent in SIP request messages from the IP phone.