Yealink W53P

Advanced Features
205
Advanced Features
The advanced features require server support. Consult your server partner to find out if these features are supported.
Topics
Call Park and Retrieve
Shared Line
Intercom
Voice Mail
XML Browser
Call Park and Retrieve
Call park allows users to park a call on a special extension and then retrieve it from another phone (for example, a
phone in another office or conference room).
The IP phones support call park feature under the following modes:
l FAC mode: parks the call to the local extension or a desired extension through dialing the park code.
l Transfer mode: parks the call to the shared parking lot through performing a blind transfer. For some servers, the
system will return a specific call park retrieve number (park retrieve code) from which the call can be retrieved after
parking successfully.
Topic
Call Park and Retrieve Configuration
Call Park and Retrieve Configuration
The following table lists the parameters you can use to configure call park and retrieve.
Parameter features.call_park.park_mode <y0000000000xx>.cfg
Description It configures the call park mode.
Permitted Val-
ues
1-FAC, park a call through dialing the call park code.
2-Transfer, blind transfer the call to a shared parking lot.
Default 2
Web UI Features->Call Pickup->Call Park Mode
Parameter features.call_park.enable <y0000000000xx>.cfg
Description It enables or disables the user to use Park option when performing call park feature.
Permitted Val-
ues
0-Disabled
1-Enabled
Default 0
Web UI Features->Call Pickup->Call Park
Parameter features.call_park.park_code <y0000000000xx>.cfg
Description
It configures the call park code for FAC call park mode, or configures shared parking lot for Transfer
call park mode.