Yealink W53P

Configuration Parameters
221
Configuration Parameters
This section provides a description and permitted values of some settings.
Topics
BroadSoft Parameters
Ethernet Interface MTU Parameter
SIP Settings Parameters
Call Settings Parameters
APP Settings Configuration
BroadSoft Parameters
This section shows the parameters you can use to configure the phone with BroadSoft server.
For more information on BSFT, refer to Yealink_IP_Phone_Features_Integrated_with_BroadSoft_UC-One_User_Guide or
Yealink_IP_Phones_Deployment_Guide_for_BroadSoft_UC-One_Environment.
BroadSoft Settings
Parameter
bw.enable
[1]
<y0000000000xx>.cfg
Description It enables or disables the BroadSoft features for IP phones.
Permitted Values
0-Disabled
1-Enabled
Default 0
[1]
If you change this parameter, the IP phone will reboot to make the change take effect.
Broadsoft XSI
Parameter
account.X.xsi.user
[1]
<MAC>.cfg
Description
It configures the user name for XSI authentication.
Example:
account.1.xsi.user = 3502@as.iop1.broadworks.net
Note: It works only if “bw.xsi.enable" is set to 1 (Enabled).
Permitted
Values
String within 99 characters
Default Blank
Web UI Applications->Broadsoft XSI->XSI Account->User ID (if bw.enable =1)
Parameter
account.X.xsi.password
[1]
<MAC>.cfg
Description
It configures the password for XSI authentication.
Example:
account.1.xsi.password = 123456
Note: It works only if “sip.authentication_for_xsi” is set to 0 (User Login Credentials for XSI Authentic-