Yealink W53P

Administrator’s Guide for W60P/W53P/W41P DECT Phones
120
Customizing Local Contact File
1. Open the local contact file.
2. To add a contact, add <contact display_name="" office_number="" mobile_number="" other_number=""/> to the
file. Each starts on a new line.
3. Specify the values within double quotes.
For example:
<contact display_name="Lily"office_number="1020" mobile_number="1021" other_number="1112"/>
<contact display_name="Tom" office_number="2020" mobile_number="2021" other_number="2112"/>
4. Save the changes and place this file to the provisioning server.
Local Contact Files and Resource Upload
You can upload local contact files to add multiple contacts at a time.
The following table lists the parameter you can use to upload the local contact files.
Parameter
handset.X.contact_list.url
[1]
<y0000000000xx>.cfg
Description It configures the access URL of the contact file of a specific handset.
Permitted Values URL within 511 characters
Default Blank
Web UI Directory->Local Directory->Import Contacts->Import to (Handset X)
Lightweight Directory Access Protocol (LDAP)
LDAP is an application protocol for accessing and maintaining information services for the distributed directory over
an IP network. You can configure the IP phones to interface with a corporate directory server that supports LDAP ver-
sion 2 or 3. The following LDAP servers are supported:
l Microsoft Active Directory
l Sun ONE Directory Server
l Open LDAP Directory Server
l Microsoft Active Directory Application Mode (ADAM)
For more information on LDAP, refer to LDAP Directory on Yealink IP Phones.
Topics
LDAP Attributes
LDAP Configuration
LDAP Attributes
The following table lists the most common attributes used to configure the LDAP lookup on IP phones.
Abbreviation Name Description
gn givenName First name
cn commonName LDAP attribute is made up from given name joined to surname.
sn surname Last name or family name