Yealink W53P

Administrator’s Guide for W60P/W53P/W41P DECT Phones
218
Default 0
Web UI Features->General Information->Reboot in Talking
Reserve # in User Name
Reserve # in User Name feature allows IP phones to reserve “#” in user name. When Reserve # in User Name feature is
disabled, “#” will be converted into “%23”. For example, the user registers an account (user name: 1010#) on the
phone, the phone will send 1010%23 instead of 1010# in the REGISTER message or INVITE message to the SIP server.
Example of a SIP REGISTER message:
INVITE sip:2@10.2.1.48:5060 SIP/2.0
Via: SIP/2.0/UDP 10.3.20.6:5060;branch=z9hG4bK1867789050
From: "1010" <sip:1010%23@10.2.1.48:5060>;tag=1945988802
To: <sip:2@10.2.1.48:5060>
Call-ID: 0_2336101648@10.3.20.6
CSeq: 1 INVITE
Contact: <sip:1010%23@10.3.20.6:5060>
Content-Type: application/sdp
Allow: INVITE, INFO, PRACK, ACK, BYE, CANCEL, OPTIONS, NOTIFY, REGISTER, SUBSCRIBE, REFER, PUBLISH, UPDATE,
MESSAGE
Max-Forwards: 70
User-Agent: Yealink W60B 77.81.0.10
Allow-Events: talk,hold,conference,refer,check-sync
Content-Length: 300
Topic
Reserve # in User Name Configuration
Reserve # in User Name Configuration
The following table lists the parameter you can use to configure reserve # in user name.
Parameter sip.use_23_as_pound <y0000000000xx>.cfg
Description It enables or disables the IP phone to reserve the pound sign (#) in the user name.
Permitted Values
0-Disabled (convert the pound sign into “%23”)
1-Enabled
Default 1
Web UI Features->General Information->Reserve # in User Name