Yealink W53P

Administrator’s Guide for W60P/W53P/W41P DECT Phones
236
Viewing the Syslog Messages on Your Syslog Server
Syslog Logging Configuration
The following table lists the parameters you can use to configure syslog logging.
Parameter static.syslog.enable <y0000000000xx>.cfg
Description It enables or disables the IP phone to upload log messages to the syslog server in real time.
Permitted
Values
0-Disabled
1-Enabled
Default 0
Web UI Settings->Configuration->Syslog->Enable Syslog
Parameter static.syslog.server <y0000000000xx>.cfg
Description
It configures the IP address or domain name of the syslog server when exporting log to the syslog server.
Example:
static.syslog.server = 192.168.1.100
Permitted
Values
IP address or domain name
Default Blank
Web UI Settings->Configuration->Syslog->Syslog Server
Parameter static.syslog.server_port <y0000000000xx>.cfg
Description
It configures the port of the syslog server.
Example:
static.syslog.port = 515
Permitted
Values
Integer from 1 to 65535
Default 514
Web UI Settings->Configuration->Syslog->Syslog Server->Port
Parameter static.syslog.transport_type <y0000000000xx>.cfg
Description
It configures the transport protocol that the IP phone uses when uploading log messages to the syslog
server.
Permitted
Values
0-UDP
1-TCP
2-TLS
Default 0
Web UI Settings->Configuration->Syslog->Syslog Transport Type
Parameter static.syslog.level <y0000000000xx>.cfg
Description
It configures the lowest level of syslog information that displays in the syslog.
When you choose a log level, it includes all events of an equal or higher severity level and excludes
events of a lower severity level. The logging level you choose determines the lowest severity of events to