Yealink W53P

Administrator’s Guide for W60P/W53P/W41P DECT Phones
74
Handset Name Configuration
The following table lists the parameter you can use to configure the handset name.
Parameter
handset.X.name
[1]
<y0000000000xx>.cfg
Description
It configures the name of the handset.
Note: If it is set to blank, it will display the corresponding default handset name.
Permitted Values String within 24 characters
Default
The handset name for handset 1 is Handset 1.
The handset name for handset 2 is Handset 2.
The handset name for handset 3 is Handset 3.
The handset name for handset 4 is Handset 4.
The handset name for handset 5 is Handset 5.
The handset name for handset 6 is Handset 6.
The handset name for handset 7 is Handset 7.
The handset name for handset 8 is Handset 8.
Web UI
Account->Handset Name->Handset X
[1]
Handset UI OK->Settings->Handset Name
DD Phone UI Menu->Settings->Basic Settings->Phone Name
[1]
X is the handset ID. X=1-8.
Language
Yealink IP phones support multiple languages. Languages used on the handset user interface and web user interface
can be specified respectively as required.
Topics
Supported Languages
Language Display Configuration
Language for Web Display Customization
Supported Languages
You can ask the distributor or Yealink FAE for language packs. You can also obtain the language packs online:
http://support.yealink.com/documentFront/forwardToDocumentFrontDisplayPage.
The following table lists available languages and associated language packs supported by the handset user interface
and the web user interface.
Phone User Interface Web User Interface
Language Language Pack Language Language Pack Note Language Pack
English / English 1.English.js 1.English_note.xml