Yealink W53P

Administrator’s Guide for W60P/W53P/W41P DECT Phones
128
Remote Phone Book Configuration
The following table lists the parameters you can use to configure remote phone book.
Parameter
remote_phonebook.data.X.url
[1]
<y0000000000xx>.cfg
Description
It configures the access URL of the remote phone book.
Example:
remote_phonebook.data.1.url = http://192.168.1.20/phonebook.xml
Note: The size of a remote phone book file should be less than 1.5M.
Permitted
Values
URL within 511 characters
Default Blank
Web UI Directory->Remote Phone Book->Remote URL
Parameter
remote_phonebook.data.X.name
[1]
<y0000000000xx>.cfg
Description
It configures the display name of the remote phone book item.
Example:
remote_phonebook.data.1.name = Xmyl
Permitted
Values
String within 99 characters
Default Blank
Web UI Directory->Remote Phone Book->Display Name
Parameter remote_phonebook.display_name <y0000000000xx>.cfg
Description
It configures the display name of the remote phone book.
Example:
remote_phonebook.display_name = Friends
If it is left blank, "Remote Phone Book" will be the display name.
Permitted
Values
String within 99 characters
Default Blank
Parameter features.remote_phonebook.enable <y0000000000xx>.cfg
Description
It enables or disables the IP phone to perform a remote phone book search for an incoming or outgoing
call and display the matched results on the .
Permitted
Values
0-Disabled
1-Enabled
Default 0
Web UI Directory->Remote Phone Book->Incoming/Outgoing Call Lookup
Parameter features.remote_phonebook.flash_time <y0000000000xx>.cfg
Description
It configures how often to refresh the local cache of the remote phone book.
If it is set to 3600, the IP phone will refresh the local cache of the remote phone book every 3600 seconds