Yealink W53P

Call Features
153
Call Forward Configuration
Call Forward Configuration
The following table lists the parameters you can use to configure call forward.
Parameter
account.X.always_fwd.enable
[1]
<MAC>.cfg
Description
It triggers always forward feature to on or off.
Note: It works only if “features.fwd.allow” is set to 1 (Enabled).
Permitted
Values
0-Off
1-On, incoming calls to the account X are forwarded to the destination number (configured by the para-
meter “account.X.always_fwd.target”) immediately.
Default 0
Web UI Features->Forward&DND->Forward->AccountX->Always Forward->On/Off
Handset UI OK->Call Features->Call Forward->LineX->Always(Disabled/Enabled) ->Status
DD Phone
UI
Menu->Features->Call Forward->AccountX->Always Forward->Always Forward
Parameter
account.X.always_fwd.target
[1]
<MAC>.cfg
Description
It configures the destination number of the always forward.
Note: It works only if “features.fwd.allow” is set to 1 (Enabled).
Permitted
Values
String within 32 characters
Default Blank
Web UI Features->Forward&DND->Forward->AccountX->Always Forward->Target
Handset UI OK->Call Features->Call Forward->LineX->Always(Enabled) ->Target
DD Phone
UI
Menu->Features->Call Forward->AccountX->Always Forward->Forward to
Parameter
account.X.always_fwd.on_code
[1]
<MAC>.cfg
Description
It configures the always forward on code to activate the server-side always forward feature.
The IP phone will send the always forward on code and the pre-configured destination number (con-
figured by the parameter “account.X.always_fwd.target”) to the server when you activate always forward
feature on the IP phone.
Note: It works only if “features.fwd.allow” is set to 1 (Enabled).
Permitted
Values
String within 32 characters
Default Blank
Web UI Features->Forward&DND->Forward->AccountX->Always Forward->On Code
Parameter
account.X.always_fwd.off_code
[1]
<MAC>.cfg
Description
It configures the always forward off code to deactivate the server-side always forward feature.
The IP phone will send the always forward off code to the server when you deactivate always forward fea-
ture on the IP phone.