Call Features
139
Description
It configures the block out numbers.
Example:
dialplan.block_out.number.1 = 4321
When you dial the number “4321” on your phone, the dialing will fail and the phone screen will prompt
"Forbidden Number".
Permitted
Values
String within 32 characters
Default Blank
Web UI
Settings->Dial Plan->Block Out->BlockOut NumberX
[1]
Parameter
dialplan.block_out.line_id.X
[1]
<y0000000000xx>.cfg
Description
It configures the desired line to apply the block out rule. The digit 0 stands for all lines. If it is left blank,
the block out rule will apply to all lines on the IP phone.
Note: Multiple line IDs are separated by commas.
Permitted
Values
0 to 8
Default Blank
Web UI Settings->Dial Plan->Block Out->Account
[1]
X is from 1 to 10.
Example: Adding Replace Rules Using a Replace Rule File
The following example shows the configuration for adding replace rules.
Customize the replace rule template file and place this file to the provisioning server “http://192.168.10.25”.
Example
dialplan_replace_rule.url = http://192.168.10.25/DialPlan.xml
After provisioning, the rules defined in this file are added to the IP phone, and you can use the replace rules on the
phone.
Emergency Dialplan
You can dial the emergency telephone number (emergency services number) at any time when the IP phone is
powered on and has been connected to the network. It is available even if your phone keypad is locked or no SIP
account is registered.
Yealink IP phones support emergency dialplan.
Emergency Dial Plan
You can configure the emergency dial plan for the phone (for example, emergency number, emergency routing). The
phone determines if this is an emergency number by checking the emergency dial plan. When placing an emergency
call, the call is directed to the configured emergency server. Multiple emergency servers may need to be configured for
To Next Page
Loading...
