Yealink W53P

Administrator’s Guide for W60P/W53P/W41P DECT Phones
160
Description
It configures the name of the multicast paging group to be displayed in the paging list. It will be dis-
played on the when placing the multicast paging calls.
Example:
multicast.paging_address.1.label = Product
Permitted
Values
String
Default Blank
Web UI Directory->Multicast IP->Paging List->Label
Parameter
multicast.paging_address.X.channel
[1]
<y0000000000xx>.cfg
Description
It configures the channel of the multicast paging group in the paging list.
Example:
multicast.paging_address.1.channel = 3
multicast.paging_address.2.channel = 5
Permitted
Values
0-all the Yealink IP phones running firmware version 80 or earlier or Yealink IP phones listen to channel 0
or third-party available devices (for example, Cisco IP phones) in the paging group can receive the RTP
stream.
1 to 25-the Polycom or Yealink IP phones preconfigured to listen to the channel can receive the RTP
stream.
26 to 30-the Yealink IP phones preconfigured to listen to the channel can receive the RTP stream.
Default 0
[1]
X ranges from 1 to 31
Multicast Listening Group Configuration
Yealink IP phones support up to 31 groups for listening. You can assign multicast IP address with a channel for each
group, and specify a label to each group to identify the phones in the group, such as All, Sales, or HR.
The following table lists the parameters you can use to configure the multicast listening group.
Parameter
multicast.listen_address.X.ip_address
[1]
<y0000000000xx>.cfg
Description
It configures the multicast address and port number that the IP phone listens to.
Example:
multicast.listen_address.1.ip_address = 224.5.6.20:10008
Note: The valid multicast IP addresses range from 224.0.0.0 to 239.255.255.255.
Permitted
Values
IP address: port
Default Blank
Web UI Directory->Multicast IP->Multicast Listening->Listening Address
Parameter
multicast.listen_address.X.label
[1]
<y0000000000xx>.cfg
Description
It configures the label to be displayed on the LCD screen when receiving the multicast paging calls.
Example: