Yealink W53P

Phone Network
35
802.1x Authentication
Yealink IP phones support the following protocols for 802.1X authentication:
l EAP-MD5
l EAP-TLS (requires Device and CA certificates, requires no password)
l EAP-PEAP/MSCHAPv2 (requires CA certificates)
l EAP-TTLS/EAP-MSCHAPv2 (requires CA certificates)
l EAP-PEAP/GTC (requires CA certificates)
l EAP-TTLS/EAP-GTC (requires CA certificates)
l EAP-FAST (supports EAP In-Band provisioning, requires CA certificates if the provisioning method is Authenticated
Provisioning)
For more information on 802.1X authentication, refer to Yealink 802.1X Authentication.
Topic
802.1x Authentication Configuration
802.1x Authentication Configuration
The following table lists the parameters you can use to configure 802.1x authentication.
Parameter
static.network.802_1x.mode
[1]
<y0000000000xx>.cfg
Description It configures the 802.1x authentication method.
Permitted
Values
0-EAP-None, 802.1x authentication is not required.
1-EAP-MD5
2-EAP-TLS
3-EAP-PEAP/MSCHAPv2
4-EAP-TTLS/EAP-MSCHAPv2
5-EAP-PEAP/GTC
6-EAP-TTLS/EAP-GTC
7-EAP-FAST
Default 0
Web UI Network->Advanced->802.1x->802.1x Mode
Parameter
static.network.802_1x.identity
[1]
<y0000000000xx>.cfg
Description
It configures the user name for 802.1x authentication.
Example:
static.network.802_1x.identity = yealink
Note: It works only if “static.network.802_1x.mode” is set to 1, 2, 3, 4, 5, 6 or 7.
Permitted
Values
String within 32 characters
Default Blank