Yealink W53P

Administrator’s Guide for W60P/W53P/W41P DECT Phones
152
l Forward calls in special situations, such as when the phone is busy or there is no answer, or forwarding all incoming
calls to a contact immediately.
l Manually forward an incoming call to a number.
Topics
Call Forward Settings Configuration
Call Forward Feature Configuration
Call Forward Settings Configuration
You can change the following call forward settings:
l Enable or disable the call forward feature. If disabled, the users have no permission to configure call forward on
their phone.
l Allow or disallow users to forward an incoming call to an international telephone number (the prefix is 00).
l Enable or disable the display of the Diversion header. The Diversion header allows the phone which receives a for-
warded-call to indicate where the call was from.
The following table lists the parameters you can use to change the call forward settings.
Parameter features.fwd.allow <y0000000000xx>.cfg
Description It enables or disables the call forward feature.
Permitted Val-
ues
0-Disabled, call forward feature is not available to the users.
1-Enabled
Default 1
Parameter forward.international.enable <y0000000000xx>.cfg
Description It enables or disables the IP phone to forward incoming calls to international numbers (the prefix is 00).
Permitted Val-
ues
0-Disabled
1-Enabled
Default 1
Web UI Features->General Information->Fwd International
Parameter features.fwd_diversion_enable <y0000000000xx>.cfg
Description
It enables or disables the IP phone to present the diversion information when an incoming call is for-
warded to the IP phone.
Permitted Val-
ues
0-Disabled
1-Enabled, the server can use the Diversion field with a SIP header to inform the phone of a call’s his-
tory.
Default 1
Web UI Features->General Information->Diversion/History-Info
Call Forward Feature Configuration
Yealink IP phones support call forward on code and off code to activate and deactivate server-side call forward feature.
They may vary on different servers.
Topic