Yealink W53P

Administrator’s Guide for W60P/W53P/W41P DECT Phones
148
ing call during a call.
Note: It works only if “call_waiting.enable” is set to 1 (Enabled).
Permitted Val-
ues
0-Disabled
1-Enabled
Default 1
Web UI Features->Audio->Call Waiting Tone
Handset UI OK->Call Features->Call Waiting->Tone
DD Phone UI Menu->Features->Call Waiting->Play Tone
Parameter call_waiting.on_code <y0000000000xx>.cfg
Description
It configures the call waiting on code.
The IP phone will send the code to activate call waiting on server-side when you activate it on the IP
phone.
Example:
call_waiting.on_code = *71
Permitted Val-
ues
String within 32 characters
Default Blank
Web UI Features->General Information->Call Waiting On Code
Parameter call_waiting.off_code <y0000000000xx>.cfg
Description
It configures the call waiting off code.
The IP phone will send the code to deactivate call waiting on server-side when you deactivate it on the
IP phone.
Example:
call_waiting.off_code = *72
Permitted Val-
ues
String within 32 characters
Default Blank
Web UI Features->General Information->Call Waiting Off Code
Do Not Disturb (DND)
DND feature enables the phone to reject all incoming calls automatically when you do not want to be interrupted. You
can choose to implement DND locally on the phone or on the server-side.
Topics
DND Settings Configuration
DND Feature Configuration
DND Settings Configuration
You can change the following DND settings: