Account Settings
113
Number of Simultaneous Outgoing Calls
Number of simultaneous outgoing calls allows you to configure the max number of simultaneous outgoing calls for a
specific account on a base.
The number of active handsets affects this feature.
Related Topics
Number of Active Handsets
Number of Simultaneous Outgoing Calls Configuration
Number of Simultaneous Outgoing Calls Configuration
The following table lists the parameter you can use to configure the number of simultaneous outgoing calls.
Parameter
account.X.simultaneous_outgoing.num
[1]
<MAC>.cfg
Description
It configures the max number of simultaneous outgoing calls for a specific account on a base sta-
tion.
Note: You should set the value of this parameter lower than or equal to “base.active_hand-
set.number”.
Permitted Val-
ues
Integer from 1 to 8
Default 8
Web UI Account->Advanced->Number of simultaneous outgoing calls
[1]
X is the account ID. X=1-8.
Number Assignment
After the handset is registered to the base station, you can assign one or more outgoing lines or incoming lines for the
handset.
The handset can only use the assigned outgoing line(s) to place calls. When multiple outgoing lines are assigned to the
handset, the handset uses the first line as the default outgoing line. You can change the default outgoing line of the
handset.
The handset can only receive incoming calls of the assigned incoming line(s). You can assign incoming lines to all
handsets that are registered to the same base station.
Topic
Number Assignment Configuration
Number Assignment Configuration
The following table lists the parameters you can use to assign lines.
Parameter
handset.X.incoming_lines
[1]
<y0000000000xx>.cfg
Description It configures the lines to receive incoming calls for a specific handset.
Permitted Values
1-Line 1
2-Line 2
To Next Page
Loading...
