Yealink W53P

Administrator’s Guide for W60P/W53P/W41P DECT Phones
114
3-Line 3
4-Line 4
5-Line 5
6-Line 6
7-Line 7
8-Line 8
Multiple line IDs are separated by commas.
Default
The incoming line for handset 1 is line 1-line5.
The incoming line for handset 2 is line 2.
The incoming line for handset 3 is line 3.
The incoming line for handset 4 is line 4.
The incoming line for handset 5 is line 5.
The incoming line for handset 6 is line 6.
The incoming line for handset 7 is line 7.
The incoming line for handset 8 is line 8.
Web UI Account->Number Assignment->Incoming lines
Handset UI
OK->Settings->Telephony->Incoming Lines (Default PIN:0000) ->HandsetX
[1]
DD Phone UI Menu->Settings->Advanced Settings (default password: 0000) ->Incoming Lines
Parameter
handset.X.dial_out_lines
[1]
<y0000000000xx>.cfg
Description It configures the lines to place outgoing calls for the handset.
Permitted Values
1-Line 1
2-Line 2
3-Line 3
4-Line 4
5-Line 5
6-Line 6
7-Line 7
8-Line 8
Multiple line IDs are separated by commas.
Default
The outgoing line for handset 1 is line 1-line5.
The outgoing line for handset 2 is line 2.
The outgoing line for handset 3 is line 3.
The outgoing line for handset 4 is line 4.
The outgoing line for handset 5 is line 5.