Yealink W53P

Call Features
147
Default 0
Web UI Account->Basic->Send Anonymous Rejection Code
Parameter
account.X.anonymous_reject_offcode
[1]
<MAC>.cfg
Description
It configures the anonymous call rejection off code.
The IP phone will send the code to deactivate anonymous call rejection feature on server-side when you
deactivate it on the IP phone.
Example:
account.1.anonymous_reject_offcode = *75
Permitted
Values
String within 32 characters
Default Blank
Web UI Account->Basic->Send Anonymous Rejection Code->Off Code
[1]
X is the account ID. X=1-8.
Call Waiting
Call waiting enables you to receive another call when there is already an active call on your phone. If it is disabled, the
new incoming call will be rejected automatically.
You can enable call waiting feature and set the phone to play a warning tone to avoid missing important calls during a
call.
Yealink IP phones also support call waiting on code and off code to activate and deactivate server-side call waiting fea-
ture. They may vary on different servers.
Topic
Call Waiting Configuration
Call Waiting Configuration
The following table lists the parameters you can use to configure call waiting.
Parameter call_waiting.enable <y0000000000xx>.cfg
Description It enables or disables the call waiting feature.
Permitted Val-
ues
0-Disabled, a new incoming call is automatically rejected by the IP phone with a busy message during
a call.
1-Enabled, the phone screen will present a new incoming call during a call.
Default 1
Web UI Features->General Information->Call Waiting
Handset UI OK->Call Features->Call Waiting->Status
DD Phone UI Menu->Features->Call Waiting->Call Waiting
Parameter call_waiting.tone <y0000000000xx>.cfg
Description
It enables or disables the IP phone to play the call waiting tone when the IP phone receives an incom-